September 25, 2015 - 0 comment
Painting the exterior of your home can be a very effective way to spruce it up and increase your curb appeal without performing costly updates like changing the landscape, making add-ons or remodeling jobs. In the Toronto area the weather can be tough on the exterior of your home, so it is important to keep the paint job current and in good shape, so that the materials underneath are not subject to rot and infestation among other things. Build your confidence and help to put you on the right path to painting your exterior in no time flat.
1. Weather Planning
Existing moisture on the surface you intend to paint or precipitation during the job can wash away exterior latex and also prevent it from curing and bonding to the surface. It is best to way for at least a full week of dry weather with temperatures over 50 degrees.
2. Contain the Lead
Homes built before 1978 may contain lead paint and you must be careful when removing those exterior layers. It is best to use a respirator and grinding machine to protect your health and get through the job with as little mess as possible.
3. Get in the Cracks
Before you begin the painting process, be sure to go over your home thoroughly and replace any rotted wood, holed boards or problem areas. If you cannot replace the whole section, purchase a high grade wood putty to cover the area and sand it smooth.
4. Clean it up
Another valuable tip to use before beginning your exterior painting project is to get up there and give it a good pressure washing. Clean exteriors hold paint and primer better than dirty ones.
5. Prime it
It is very seldom that the exterior surface of your home is smooth enough to warrant a lack of primer coat. It is best to roll on at least one coat of primer to ensure your exterior will take the paint thoroughly and provide that extra layer of protection from the elements.
6. Pull out the Caulk
After you’ve primed the exterior, it is time to seal your edges by running a bead of caulk between each surface and then smoothing the seam with your index finger. For points where two different materials meet, choose an acrylic caulk that works with both.
7. Quality Paint
Professional painters like Perfect Painter in the Toronto area will tell you a quality paint makes all the difference and when it comes to protecting your home’s first line of defense against pest and weather, you cannot afford to go cheap. Spend a little extra for the acrylic latex and you won’t have to do the job again for a while.
You can use standard brushes, rollers or sprayers that all have different advantages, but the best combination strategy would be to roll or spray the large areas (based on you skill with a sprayer) and use a brush for the area where control is needed like windows, doors and tight corners.
9. Use the Shade
It is important to avoid applying wet paint over dry because it will create lap marks when make the color look bad and uneven. Exterior painting should be done in the shade if possible to keep adjacent sections of paint wet at the same time.
For actual brushes, select a quality brush and apply thick paint to the area, while working in 3-4 foot sections. For rollers, try to shake off excess paint in the 5 gallon bucket and come back with a smaller brush for the crevices.
These tips should keep you on the right track to finishing your Toronto exterior painting project with as little waste and additional expense as possible.